Vista Slow Detecting Proxy Settings

Configuring Single Sign- On. Single Sign- On Overview. The following sections describe how to configure SSO: 1 Sonic.

GridinSoft Anti-Malware - GridinSoft Anti-Malware effectively targets PC threats, including adware, malware, and PUPs allowing you to purge them with ease - ensuring.

WALL Directory Connector executable file and double click it. It may take several seconds for the Install. Shield to prepare for the installation.

If you’ve never checked on your app subscriptions, I don’t blame you. It’s a feature buried pretty deeply in your iOS device. But then, you could discover an. How to configure Mail Anti-Virus settings in Kaspersky PURE 3.0 with Microsoft Office Outlook and the Bat! Back to "Computer Protection".

Next to continue. The License Agreement displays. I accept the terms in the license agreement and click Next to continue. The Customer Information page displays. User Name field and your organization name in the Organization field. Select to install the application for Anyone who uses this computer (all users) or Only for me (Sonicwall User). Next to continue.

List of Chromium Command Line Switches. There are lots of command lines which can be used with the Google Chrome browser. Some change behavior of features, others are. If you are seeing a “The proxy server isn’t responding” when trying to load a web page while using Internet Explorer, then you machine may be infected with an. Make sure you configure the chat software.

The Destination Folder page displays. The Sonic. WALL Directory Connector Service User Configuration page displays.

NOTE: Skip. 9 Username field, the password for the account in the Password field, and the domain name of the account in the Domain Name field. The Default SSO Agent Sonic. WALL Appliance Configuration page displays. NOTE: Next. 1. 0 Sonic. WALL Appliance IP field. Type the port number for the same appliance in the Sonic.

WALL Appliance Port field. Enter a shared key (a hexadecimal number from 1 to 1. Shared Key field. Click Next to continue. Launch Sonic. WALL Directory Connector box to launch the Sonic. WALL Directory Connector, and click Finish.

Launch Sonic. WALL Directory Connector box, the Sonic. WALL Directory Connector displays. I agree and click Next to continue. Next. To specify a custom location, click Browse, select the folder, and click Next. Next to start the installation.

Close to exit the installer. Yes in the dialog box. To restart later, click No. Start > All Programs > Sonic. WALL > Sonic. WALL Directory Connector > Sonic. WALL Configuration Tool. NOTE: Yes to use the default IP address (1.

No to use the current configuration. Yes, the message Successfully restored the old configuration will display. Click OK. No, or if you clicked Yes but the default configuration is incorrect, the message Sonic. WALL SSO Agent service is not running.

Please check the configuration and start the service. Click OK. Sonic. WALL SSO Agent service is not running. Please check the configuration and start the service displays, the SSO Agent service will be disabled by default. To enable the service, expand the Sonic.

WALL Directory Connector Configuration Tool in the left navigation panel by clicking the + icon, highlight the Sonic. WALL SSO Agent underneath it, and click the button. Sonic. WALL SSO Agent and select Properties. Logging Level drop- down menu, select the level of events to be logged in the Windows Event Log. The default logging level is 1. Select one of the following levels. NOTE: 4 Refresh Time field, enter the frequency, in seconds, that the SSO Agent will refresh user log in status.

The default is 6. Query Source drop- down menu, select the protocol that the SSO Agent will use to communicate with workstations, either NETAPI or WMI. NOTE: 6 Configuration File field, enter the path for the configuration file. The default path is C: \Program Files\Sonic. WALL\DCON\SSO\CIAConfig. Sonic. WALL Appliance and select Add.

Appliance IP field. Enter the port for the same appliance in the Appliance Port field. The default port is 2.

Give your appliance a friendly name in the Friendly Name field. Enter a shared key in the Shared Key field or click Generate Key to generate a shared key. Edit icon above the left- hand navigation panel. You can also click the Edit tab at the bottom of the right- hand window. Delete icon above the left- hand navigation panel.

Pause button . To stop services for an appliance, select the appliance from the left- hand navigation panel and click the Stop button . To resume services, click the Start button . NOTE: 2 Settings tab, type the IP address of the firewall into the Appliance IP field. Appliance Port field.

The default port is 2. This port must be open on the Windows Server system. Shared Secret field. Select the Show Secret checkbox to view the characters and verify correctness. The same shared secret must be configured on the firewall.

Timeout drop- down list, select the number of seconds that the agent will wait for a reply from the appliance before retrying the notification. The range is 5 to 1.

Retries drop- down list, select the number of times the agent will retry sending a notification to the appliance when it does not receive a reply. The range is 3 to 1. Enable Verbose Log checkbox. Do this only to provide extra, detailed information in a trouble shooting report. Avoid leaving this enabled at other times because it may impact performance. Apply. A dialog box indicates that the Sonic.

WALL TSA service has restarted with the new settings. Sonic. WALL TSA desktop icon. The Sonic. WALL Terminal Services Agent window displays. Sonic. WALL TSA desktop icon. The Sonic. WALL Terminal Services Agent window displays. Single- sign- onmethod(s) section, select Sonic.

WALL SSO Agent. Use this choice to add and configure a TSA as well as an SSO Agent for the SSO method. Configure SSO. The SSO Authentication Configuration page displays. SSO Agents tab at the top left, and on the SSO Agents tab under Authentication Agent Settings you can view any SSO Agents already configured.

The green LED next to the Agent’s IP address indicates that the agent is currently up and running. A red LED would indicate that the agent is down. A grey LED shows that the agent is disabled.

The LEDs are dynamically updated using AJAX. Add button to create an agent. The page is updated to display a new row in the table at the top, and two new tabs (Settings and Advanced) in the lower half of the page. The default port is 2. Note that agents at different IP addresses can have the same port number. The shared key must match exactly. Re- enter the shared key in the Confirm Shared Key field.

This field is automatically populated with the default of 1. The default is 6. Advanced tab and then enter the following information. The default is 3. General Settings tab under Authentication Agent Settings to configure the following options. This only affects agents using Net. API/WMI. This prevents browsing delays.

CAUTION: 9 Users tab to display the User Settings page to specify the following options. When selected, the domain component of a user name will be ignored.

User names returned from the authentication agent typically include a domain component, for example, domain. If this box is not checked, user names in the local database must match exactly the full names returned from the agent, including the domain component. These users will not be given membership in the Trusted Users user group, even when set locally, and so will not get any access set for Trusted Users.

They are identified in logs as computer- name/user- name. Simple user names in local database option is disabled, user names must be configured in the local database using the full computer- name/user- name identification. This causes the firewall to probe for a response on the Net.

API/WMI port before requesting that the SSO Agent identify a user. If no response occurs, these devices will fail SSO immediately. Such devices do not respond to, or may block, the Windows networking messages used by the SSO Agent to identify a user. The Probe timeout (seconds) is set to 5 seconds by default. Probes are sent after initiating user authentication through the SSO agent. Click Configure to configure the LDAP settings. The LDAP Configuration page displays.

For configuration information for this page, refer to Advanced LDAP Configuration. The security appliance will poll the workstation running SSO Agent once every interval to verify that users are still logged on. This feature rate- limits requests to the agent. The default is 1. In the Service User name dialog box, type the service login name (the simple name only, without the domain or PC name) into the Enter the name of a user account used by a Windows service field and then click OK. Edit. Make the desired changes in the Service User name dialog box and then click OK. Remove. 1. 2 Enforcement tab if you want to either trigger SSO on traffic from a particular zone, or bypass SSO for traffic from non- user devices such as internal proxy web servers or IP phones.

If SSO is already required on a zone by Application Control or other policies, those checkboxes are pre- selected and cannot be cleared. If Guest Services is enabled on a zone, SSO cannot be enforced and you cannot select the checkbox. To bypass SSO for certain services or types of traffic, select the service from the second drop- down menu. NOTE: WAN zone to the LAN zone for the HTTP service with Users Allowed set to All. Then configure the appropriate CFS policy for the users or user groups.

See Adding Access Rules for more information on configuring access rules. Terminal Services tab to display the Terminal Services Agent Settings page. The page is updated to display a new row in the table at the top, and new input fields in the lower half of the page. For existing agents, a green LED- style icon next to an agent indicates that the agent is up and running.

A red LED icon indicates that the agent is down. A yellow LED icon means that the TSA is idle and the appliance has not heard anything from it for 5 minutes or more. Because TSA sends notifications to the appliance rather than the appliance sending requests to the agent, a lack of notifications could mean that there is a problem, but more likely means simply that no user on the terminal server is currently active. If the terminal server is multi- homed (has multiple IP addresses) and you are identifying the host by IP address rather than DNS name, enter all the IP addresses as a comma- separated list. The default port is 2. Note that agents at different IP addresses can have the same port number. The shared key must match exactly.

Re- enter the shared key in the Confirm Shared Key field. General Settings tab under Terminal Services Agent Settings to configure the following options.